Description

This light green 2K polyester filler is made with NEW raw materials and contains fewer solvents. Airo Multi Green is a fine filler that can be used universally as a coarse or finishing filler. It doesn't shrink, is easy to sand, and has excellent stability. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper!
*Tin is exactly the same as Unipol 1.5kg

Adhesion on which surface?
- Galvanized metal sheet
- Hot-dip galvanized bodywork sheet
- Steel plate
- Aluminum
- Wood
- Glass fiber reinforced plastic based on polyester

Do not apply on
- Acid-curing primers
- Wash primer
- Nitrocellulose primer
- Synthetic primer

Instructions for use
Sand the surface to which the filler will be applied and remove any dust. Make sure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed so that the filler cannot attract moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying grains may develop after this time. The filler can be sanded after approximately 20 minutes.
CAUTION: Never mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.

Storage and processing advice
- Do not process below +5°C
- Store at +20°C in a closed (airtight) container for at least 12 months

Supplied as standard
- Indicated quantity of filler, packed in a tube (see image)
- Red hardener paste in plastic tube of 40 grams

Specifications

• Brand: Airo
• Type: Multi Green
• Weight: 1.1 kg
• Incl hardener: Yes
• For use with dispenser: Yes
• Article number: CF01S00
• EAN code:

Pros and cons