Varnish

Acrylic Thinner is a high-quality thinner for all types of acrylic paints and acrylic primers. Due to its high solvent capacity for acrylic resins, a small amount of this special thinner is sufficient to adjust the spray viscosity. The thinner prevents the formation of bubbles, even with short drying times. Can be used for both Acrylic Primefill Fuller and Acrylic HS & MS lacquers.

Read more less

Hardener for Acrylic Clearcoat HS Ultra Plus in a 2:1 mixing ratio. Available in various hardening options: normal, short, and extra short. The special hardener, combined with Acrylic Clearcoat HS Ultra Plus, produces a high gloss and is non-yellowing. Drying time: -Normally 30 to 35 minutes at +60 °C -Shortly 20 to 25 minutes at +60 °C -Extra short 10 to 15 minutes at +60 °C. Supplied without matching paint

Read more less

Acrylic Clearcoat MS is a medium solid clearcoat that can be used in both air-drying and forced-drying modes for automotive, motorcycle, and industrial applications. Acrylic Clearcoat MS features a UV filter and offers high chemical resistance. It is flexible, yet impact and scratch resistant. It has a high gloss and is universally applicable as a topcoat in a conventional or water-based basecoat system. After mixing (depending on the type of hardener), the clearcoat has a pot life of 3 to 6 hours at +20°C. After 7 minutes of flash-off, the paint dries in 30 to 35 minutes at +60°C. Supplied without matching hardener

Read more less

Acrylic Clearcoat MS is a medium solid clearcoat that can be used in both air-drying and forced-drying modes for automotive, motorcycle, and industrial applications. Acrylic Clearcoat MS features a UV filter and offers high chemical resistance. It is flexible, yet impact and scratch resistant. It has a high gloss and is universally applicable as a topcoat in a conventional or water-based basecoat system. After mixing (depending on the type of hardener), the clearcoat has a pot life of 3 to 6 hours at +20°C. After 7 minutes of flash-off, the paint dries in 30 to 35 minutes at +60°C. Supplied without matching hardener

Read more less

Acryl Klarlack HS Ultra Plus bevat niet meer dan maximaal 420 gr. oplosmiddel per liter spuitklare oplossing. Hij wordt toegepast als blanke lak op metallic basis lak of unikleuren. Hij is bestand tegen chemische en mechanische belastingen. De lak droogt op met een glanzend en hard oppervlak. De lakfilms zijn elastisch en kras vast. Airo Acryl Klarlack HS Ultra Plus is weer- en lichtbestendig, zelfs onder zware klimatologische omstandigheden.Na vermenging (afhankelijk van type verharder) heeft de blanke lak een pot-life van 1 tot 6 uur bij +20 °C. Na 7 minuten uitdampen, droogt de lak in 10 tot 45 minuten bij +60 °C.

Read more less

This 1K automotive paint is specially color-matched using professional PPG automotive paint and is available in any color. The ColorMatic pre-fill standard aerosol can is pre-filled with propellant and specific additives and then filled with the desired paint color using a filling machine. The wide flat-jet spray nozzle creates a very fine atomization, while the high quality and consistent pressure guarantee the best final result. ColorMatic pre-fill standard is a pre-filled aerosol can containing propellants and solvents, filled with a solvent-based basecoat. This basecoat must be finished with a clearcoat. Where can I find my color code? Processing: -Bring the tin to room temperature, 20°C is ideal. - Thoroughly clean the surface to be sprayed with a silicone cleaner. Larger bare surfaces should be primed first with the appropriate primer. The area must be dry and free of dust and grease. Shake the can vigorously for about 2 minutes, allowing the mixer ball to work its magic. If you don't shake it thoroughly, there's a chance of color shifts during spraying. -Preferably spray outdoors or in a well-ventilated area. Indoors, you must cover the area well to protect against fine mist. Cover all areas that should not be sprayed. Ensure good lighting so you can see where you are. Ready to start spraying? First, make a test patch to test how the spray can works and how it's applied. Apply it from a distance of 25 to 30 cm from the object, moving the can back and forth gradually. Don't try to achieve a perfectly smooth result with the first coat; this layer is purely for buildability and coverage. After the paint is applied, a clear coat will need to be sprayed over it. This can be a 1K or 2K clear coat. 2K clear coat is much stronger and resistant to gasoline. Safety: -An allergic reaction may occur due to the isocyanate used in the product. Do not expose persons with respiratory problems or allergic reactions to vapors or spray mist. -Use a paint fume mask type A2-P2 -Wear protective gloves and safety glasses Do you have a color that is mother of pearl? Then you will have to order two spray cans to make the right color. Supplied individually and can NOT exchangeable or returned!

Read more less

Colormatic 1K Clear Coat High Gloss is a fast-drying, UV-resistant clear coat that can be used with all common paint systems. Its excellent flow properties and excellent polishability make it ideal for spot repairs and respraying entire bodywork sections. Thanks to its short drying time, excellent flow and easy polishing, this 2K clearcoat is an excellent choice for spot repairs. Features: -High-gloss and UV-radiation resistant -Quick drying -Very good flow -Suitable for spot repair Processing: -Bring the tin to room temperature, 20°C is ideal. - Thoroughly clean the surface to be sprayed with a silicone cleaner. The area must be dry and free of dust and grease. Shake the can vigorously for about 2 minutes, allowing the mixer to work its magic. If you don't shake it thoroughly, there's a chance of color shifts during spraying. -Preferably spray outdoors or in a well-ventilated area. Indoors, you must cover the area well to protect against fine mist. Cover all areas that should not be sprayed. Ensure good lighting so you can see where you are. Ready to start spraying? First, make a test patch to test how the spray can works and how it's applied. -Apply it at a distance of 25 to 30 cm from the object and move the can back and forth gradually. Apply 2-3 coats of clear lacquer, allowing 2-3 minutes for the coat to dry in between. After curing (24 hours at 20°C), any transitions can be polished to a high gloss. -After use, turn the can upside down and clean the valve. Safety: -An allergic reaction may occur due to the isocyanate used in the product. Do not expose persons with respiratory problems or allergic reactions to vapors or spray mist. -Use a paint fume mask type A2-P2 -Wear protective gloves and safety glasses

Read more less

Airo Lacquer Spray is a high-quality lacquer for treating both treated and untreated surfaces. Thanks to its fast drying and excellent coverage, you won't have to wait long. The lacquer is also resistant to petrol, chemicals, and weather influences. It is UV-resistant, lightfast, and has excellent surface hardness. Suitable for metal, wood, pottery, glass, and various types of plastic.

Read more less

Airo Paint Spray is a high-quality primer for treating both treated and untreated surfaces. Thanks to its fast drying and excellent coverage, you won't have to wait long. The paint is also resistant to petrol, chemicals, and weather influences. It's ideal as a pretreatment for topcoats with nitrocellulose, alkyd resin, and 1K and 2K acrylic paints. Suitable for metal, wood, pottery, glass, and various types of plastic.

Read more less

Airo Lacquer Spray is a high-quality lacquer for treating both treated and untreated surfaces. Thanks to its fast drying and excellent coverage, you won't have to wait long. The lacquer is also resistant to petrol, chemicals, and weather influences. It is UV-resistant, lightfast, and has excellent surface hardness. Suitable for metal, wood, pottery, glass, and various types of plastic.

Read more less

Hardener for Acrylic Clearcoat HS Ultra Plus in a 2:1 mixing ratio. Available in various hardening options: normal, short, and extra short. The special hardener, combined with Acrylic Clearcoat HS Ultra Plus, produces a high gloss and is non-yellowing. Drying time: -Normally 30 to 35 minutes at +60 °C -Shortly 20 to 25 minutes at +60 °C -Extra short 10 to 15 minutes at +60 °C. Supplied without matching paint

Read more less

Acrylic Thinner is a high-quality thinner for all types of acrylic paints and acrylic primers. Due to its high solvent capacity for acrylic resins, a small amount of this special thinner is sufficient to adjust the spray viscosity. The thinner prevents the formation of bubbles, even with short drying times. Can be used for both Acrylic Primefill Fuller and Acrylic HS & MS lacquers.

Read more less

Acrylic Thinner is a high-quality thinner for all types of acrylic paints and acrylic primers. Due to its high solvent capacity for acrylic resins, a small amount of this special thinner is sufficient to adjust the spray viscosity. The thinner prevents the formation of bubbles, even with short drying times. Can be used for both Acrylic Primefill Fuller and Acrylic HS & MS lacquers.

Read more less

Acrylic Thinner is a high-quality thinner for all types of acrylic paints and acrylic primers. Due to its high solvent capacity for acrylic resins, a small amount of this special thinner is sufficient to adjust the spray viscosity. The thinner prevents the formation of bubbles, even with short drying times. Can be used for both Acrylic Primefill Fuller and Acrylic HS & MS lacquers.

Read more less

Acrylic Thinner is a high-quality thinner for all types of acrylic paints and acrylic primers. Due to its high solvent capacity for acrylic resins, a small amount of this special thinner is sufficient to adjust the spray viscosity. The thinner prevents the formation of bubbles, even with short drying times. Can be used for both Acrylic Primefill Fuller and Acrylic HS & MS lacquers.

Read more less

Acrylic Thinner is a high-quality thinner for all types of acrylic paints and acrylic primers. Due to its high solvent capacity for acrylic resins, a small amount of this special thinner is sufficient to adjust the spray viscosity. The thinner prevents the formation of bubbles, even with short drying times. Can be used for both Acrylic Primefill Fuller and Acrylic HS & MS lacquers.

Read more less

Acryl Klarlack HS Ultra Plus bevat niet meer dan maximaal 420 gr. oplosmiddel per liter spuitklare oplossing. Hij wordt toegepast als blanke lak op metallic basis lak of unikleuren. Hij is bestand tegen chemische en mechanische belastingen. De lak droogt op met een glanzend en hard oppervlak. De lakfilms zijn elastisch en kras vast. Airo Acryl Klarlack HS Ultra Plus is weer- en lichtbestendig, zelfs onder zware klimatologische omstandigheden.Na vermenging (afhankelijk van type verharder) heeft de blanke lak een pot-life van 1 tot 6 uur bij +20 °C. Na 7 minuten uitdampen, droogt de lak in 10 tot 45 minuten bij +60 °C.

Read more less

**This product is a set of clear lacquer with normal hardener** Acrylic Clear Coat HS Ultra Plus contains no more than 420g of solvent per liter of ready-to-spray solution. It is applied as a clear coat over metallic base paints or solid colors. It is resistant to chemical and mechanical stresses. The paint dries with a glossy, hard surface. The paint films are elastic and scratch-resistant. Airo Acrylic Clear Coat HS Ultra Plus is weather- and fade-resistant, even under harsh climatic conditions. After mixing (depending on the type of hardener), the clearcoat has a pot life of 1 to 6 hours at +20°C. After 7 minutes of flash-off, the paint dries in 10 to 45 minutes at +60°C.

Read more less

**This product is a set of clear lacquer with normal hardener** Acrylic Clear Coat HS Ultra Plus contains no more than 420g of solvent per liter of ready-to-spray solution. It is applied as a clear coat over metallic base paints or solid colors. It is resistant to chemical and mechanical stresses. The paint dries with a glossy, hard surface. The paint films are elastic and scratch-resistant. Airo Acrylic Clear Coat HS Ultra Plus is weather- and fade-resistant, even under harsh climatic conditions. After mixing (depending on the type of hardener), the clearcoat has a pot life of 1 to 6 hours at +20°C. After 7 minutes of flash-off, the paint dries in 10 to 45 minutes at +60°C.

Read more less

Acrylic Clear Coat HS Ultra Plus contains no more than 420g of solvent per liter of ready-to-spray solution. It is applied as a clear coat over metallic base paints or solid colors. It is resistant to chemical and mechanical stresses. The paint dries with a glossy, hard surface. The paint films are elastic and scratch-resistant. Airo Acrylic Clear Coat HS Ultra Plus is weather- and fade-resistant, even under harsh climatic conditions. After mixing (depending on the type of hardener), the clearcoat has a pot life of 1 to 6 hours at +20°C. After 7 minutes of flash-off, the paint dries in 10 to 45 minutes at +60°C. Supplied without matching hardener

Read more less