Best seller
-
Colad Sprayable film 4x300m
The Colad Sprayable Film 4mx300m is a large-format masking film for professional use. The long roll is particularly suitable for intensive use in a busy bodyshop. Specifications - Width: 4 meters - Length: 300 meters - Thickness: approx. 12 microns Supplied as standard - 1 roll of Colad sprayable film 4mx300m
€82,28 €69,93
-
Colad Wall holder for 6 pump liquid syringes
The Colad Wall Mount for 6 Pump Spray Guns is a practical wall-mounted solution for organized storage of Colad pump spray guns in the workshop. The holder keeps the guns organized and always at hand. Scope of application - Storage of 6 pump fluid syringes - Wall mounting in the bodywork workshop Instructions for use Mount the holder to the wall using the included mounting hardware. Hang the pump fluid syringes in the holder. Ensure there is sufficient space around the holder for easy access. Supplied as standard - 1x Colad wall holder for 6 pump fluid syringes - Mounting material
€26,22 €21,49
-
Colad Mixing Cup 6000 ml
The Colad 6000ml Mixing Cup is a large mixing cup for preparing larger quantities of paint, primer, and thinners. The cup features clear graduations for accurate mixing ratios. Specifications - Content: 6000ml - Material: transparent plastic - Scale division: ml and various mixing ratios Scope of application - Mixing larger quantities of car paint - Mixing primer and thinner - Professional bodywork workshop Instructions for use Use the graduations on the cup to ensure accurate mixing. Stir the mixture thoroughly before use. Clean the mixing cup immediately after use with the appropriate solvent. Supplied as standard - 1x Colad mixing cup 6000ml
€101,15 €89,68
-
Colad Skin Care Cream 250ml
Use the cream to stimulate your skin's natural recovery. Regular use (daily is recommended) ensures your skin recovers quickly and feels soft and supple. Use it after every workday! Apply Colad Skin Care Cream to clean, dry hands. Gently rub/massage the cream in until it is fully absorbed. Dermatologically tested. 250 ml bottle.
€12,55 €10,44
-
Colad Glove Dispenser
The Colad Glove Dispenser is a wall-mounted dispenser for hygienic and organized dispensing of disposable gloves in the workplace. The dispenser is suitable for gloves in sizes S, M, L, and XL. Scope of application - Dispensing disposable gloves in the workshop - Wall mounting in the bodywork and painting workshop Instructions for use Mount the dispenser on the wall. Fill the dispenser with a box of disposable gloves. Remove the gloves from the dispenser through the opening at the bottom. Supplied as standard - 1x Colad glove dispenser - Mounting material
€49,88 €44,21
-
Colad Hand Cleaner 300 ml
This powerful hand cleaner is specially formulated for quickly removing heavy soiling. It easily removes stubborn contaminants such as adhesive residue, bitumen, carbon (soot), grease, oil, paint, varnish, resin, rubber, sealant, and tar. Dermatologically tested.
€9,88 €7,61
-
Colad Hearing Protection
The Colad Hearing Protection provides effective hearing protection during noisy work in the bodyshop, such as using sanders, grinders and spray guns. Scope of application - Hearing protection when using sanders - Hearing protection during spraying work - General hearing protection in the workshop Properties - SNR value: see packaging - Comfortable to wear - Complies with European safety standards Supplied as standard - Colad hearing protection (see packaging for type and quantity)
€29,95 €19,45
-
Colad Fine dust mask with exhalation valve and carbon
The Colad Fine Dust Mask with Exhalation Valve and Carbon Filter offers combined protection against fine dust and organic vapors. The carbon filter neutralizes unpleasant odors and vapors during sanding and painting. Filter class - FFP2 or FFP3 protection against fine dust - Activated carbon for protection against organic vapours Scope of application - Sanding of filler and primer - Light spraying work - Working with solvents Properties - Exhalation valve for comfortable wearing - Activated carbon filter - Ergonomic fit Supplied as standard - 1x Colad fine dust mask with valve and carbon
€59,88 €55,27
-
Colad Fine dust mask with exhalation valve
The Colad Fine Dust Mask with Exhalation Valve offers protection against fine dust during sanding and grinding. The exhalation valve ensures comfortable wear by quickly expelling the exhaled air. Scope of application - Protection when sanding filler and primer - Protection during grinding work - General dust protection in the workshop Properties - Exhalation valve for comfortable wearing - FFP2 protection - Ergonomic fit Supplied as standard - 1x Colad fine dust mask with exhalation valve
€48,55 €41,76
-
Colad Fine Dust Mask
The Colad Fine Dust Mask provides reliable protection against fine dust during sanding and grinding work in the bodyshop. The mask is comfortable and lightweight for extended use. Scope of application - Protection when sanding filler and primer - Protection during grinding and cutting work - General dust protection in the workshop Properties - FFP2 protection - Light and comfortable - Elastic headband for a good fit Supplied as standard - Packaging Colad fine dust masks (see packaging for quantity)
€24,55 €17,81
-
Colad Electronic foil cutter
The Colad Electronic Film Cutter is a professional tool for cutting masking and cover film precisely and quickly. The electric cutter ensures a clean, straight cut without tearing the film. Scope of application - Cutting of sprayable cover film - Cutting masking film - Professional bodywork workshop Instructions for use Load the film into the cutter. Set the desired cutting length. Press the cutting button for an automatic, clean cut. Replace the blade as soon as the cutting quality deteriorates. Supplied as standard - 1x Colad Electronic foil cutter - Spare blades
€24,45 €16,45
-
Colad Vapor-permeable Foil 4mx150m
The Colad Vapor Permeable Film 4m x 150m is a special masking film that allows water vapor to pass through but blocks liquids and overspray. Ideal for use in spray booths and for work where ventilation is important. Specifications - Width: 4 meters - Length: 150 meters - Property: vapour permeable Scope of application - Covering in spray booths - Protection during spraying work with ventilation requirements - Professional bodywork workshop Supplied as standard - 1 roll of Colad vapour-permeable film 4m x 150m
€59,95 €48,45
-
Coding rings set of 5 rings + 2 identification charts
The Coding Ring Set consists of 5 colored coding rings and 2 identification cards for clearly labeling Colad pump fluid syringes. By giving each syringe its own color, you prevent confusion between different fluids. Contents of the set - 5 colored coding rings - 2 identification charts for keeping track of color coding Scope of application - Organizing multiple pump fluid syringes - Color coding of fluids in the workshop Instructions for use Attach a coding ring to each pump fluid syringe. Note on the identification chart which color corresponds to which fluid. This way, it's always immediately clear which syringe contains which fluid. Supplied as standard - 5x colored coding ring - 2x identification chart
€9,45 €7,49
-
Airo Hardener for Washprimer 0.5 ltr
The hardener is combined with the Airo Wash Primer. The hardener is specially developed for a perfect bond with the Airo Wash Primer. The hardener is mixed 2:1 with the Wash Primer. Excellent adhesion on galvanized sheet metal, hot-dip galvanized bodywork, steel sheet metal, and aluminum.
€15,31 €10,43
-
Airo Hardener HS Ultra Plus 2:1 -2.5ltr
Hardener for Acrylic Clearcoat HS Ultra Plus in a 2:1 mixing ratio. Available in various hardening options: normal, short, and extra short. The special hardener, combined with Acrylic Clearcoat HS Ultra Plus, produces a high gloss and is non-yellowing. Drying time: -Normally 30 to 35 minutes at +60 °C -Shortly 20 to 25 minutes at +60 °C -Extra short 10 to 15 minutes at +60 °C. Supplied without matching paint
€91,85 €87,74
-
Airo Tack Window sealant MS 290ml
Airo Tack Window sealant is a black MS 1K polymer sealant ideal for bonding windows. Its unique composition provides excellent adhesion to existing window sealant. It also works on glass and ceramic edges without the need for a primer. The Tack Window window sealant is UV-resistant and has very good adhesion.
€27,38 €22,94
-
Airo Tack Plastic Universal 120sec-50ml
Airo Tack Plastic Mediumfast repairs plastic parts in 120 seconds. This powerful 2K adhesive dries in 120 seconds. Its small size makes it easy to use in a caulking gun with a plastic adapter. Supplied without the required Mixer Tip Round for 2K glue.
€13,09 €11,18
-
Airo Superflex filler 3 kg
This is a very white 2K filler. This polyester filler is characterized by its exceptional fineness and easy sanding. The sanded surface is pore-free. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper. Adhesion on which surface? - Steel plate - Wood - Glass fiber reinforced plastic based on polyester Do not apply on - Aluminum - Galvanized sheet metal - Wash primer - Acid-curing primers - Nitrocellulose primer - Synthetic primer Instructions for use Sand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time. CAUTION: Never mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color. Storage and processing advice - Do not process below +5°C - Store at +20°C in a closed (airtight) container for at least 12 months Supplied as standard - Indicated quantity of filler, packed in a tube (see image) - White hardener paste in plastic tube of 60 grams
€56,14 €46,80
-
Airo Superflex filler 1.5 kg
This is a very white 2K filler. This polyester filler is characterized by its exceptional fineness and easy sanding. The sanded surface is pore-free. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper. Adhesion on which surface? - Steel plate - Wood - Glass fiber reinforced plastic based on polyester Do not apply on - Aluminum - Galvanized sheet metal - Wash primer - Acid-curing primers - Nitrocellulose primer - Synthetic primer Instructions for use Sand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time. CAUTION: Never mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color. Storage and processing advice - Do not process below +5°C - Store at +20°C in a closed (airtight) container for at least 12 months Supplied as standard - Indicated quantity of filler, packed in a tube (see image) - White hardener paste in plastic tube of 40 grams
€29,64 €25,21
-
Airo Soft filler 3 kg
A white/beige 2K polyester filler with a wide range of applications. Ideal for all filler work in body repair shops, carpentry workshops, and furniture manufacturing. It's also suitable for small boat repairs above the waterline. Easy to apply, hardens quickly, and sands easily. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper! Adhesion on which surface? - Steel plate - Wood - Glass fiber reinforced plastic based on polyester - When processing on galvanised metal sheet, use Airo Unipol as a base! Do not apply on - Aluminum - Galvanized sheet metal - Wash primer - Acid-curing primers - Nitrocellulose primer - Synthetic primer Instructions for use Sand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time. CAUTION: Never mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color. Storage and processing advice - Do not process below +5°C - Store at +20°C in a closed (airtight) container for at least 12 months Supplied as standard - Indicated quantity of filler, packed in a tube (see image) - White hardener paste in plastic tube of 60 grams
€51,03 €43,73
-
Airo Soft filler 1 kg
A white/beige 2K polyester filler with a wide range of applications. Ideal for all filler work in body repair shops, carpentry workshops, and furniture manufacturing. It's also suitable for small boat repairs above the waterline. Easy to apply, hardens quickly, and sands easily. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper! Adhesion on which surface? - Steel plate - Wood - Glass fiber reinforced plastic based on polyester - When processing on galvanised metal sheet, use Airo Unipol as a base! Do not apply on - Aluminum - Galvanized sheet metal - Wash primer - Acid-curing primers - Nitrocellulose primer - Synthetic primer Instructions for use Sand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time. CAUTION: Never mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color. Storage and processing advice - Do not process below +5°C - Store at +20°C in a closed (airtight) container for at least 12 months Supplied as standard - Indicated quantity of filler, packed in a tin (see image) - White hardener paste in plastic tube of 25 grams
€16,61 €14,31
-
Airo Quatro Mixer Tips 2k (10 pcs.)
Special mixer tips for mixing (older models) Womix and 2k cartridges, among other things. This attachment slides easily onto the top connection of the products. **NOTE: Does not fit the Airo TACK 2k kits, for this you will need to use the " Airo Mixertip ROUND ". Packed per 10 pieces for an attractive price.
€13,00 €8,52
-
Airo Plastic filler 1 kg
White 2K polyester filler with a wide range of applications. Ideal for all filler work in auto body repair, carpentry, and furniture manufacturing. Suitable for small boat repairs above the waterline. Easy to apply, hardens quickly, and sands easily. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper! Adhesion on which surface? - Steel plate - Wood - Glass fiber reinforced plastic based on polyester Do not apply on - Aluminum - Galvanized sheet metal - Wash primer - Acid-curing primers - Nitrocellulose primer - Synthetic primer Instructions for use Sand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time. CAUTION: Never mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color. Storage and processing advice - Do not process below +5°C - Store at +20°C in a closed (airtight) container for at least 12 months Supplied as standard - Indicated quantity of filler, packed in a tin (see image) - White hardener paste in plastic tube of 25 grams
€17,68 €15,23
-
Airo Plastic filler 0.5 kg/SB
White 2K polyester filler with a wide range of applications. Ideal for all filler work in auto body repair, carpentry, and furniture manufacturing. Suitable for small boat repairs above the waterline. Easy to apply, hardens quickly, and sands easily. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper! Adhesion on which surface? - Steel plate - Wood - Glass fiber reinforced plastic based on polyester Do not apply on - Aluminum - Galvanized sheet metal - Wash primer - Acid-curing primers - Nitrocellulose primer - Synthetic primer Instructions for use Sand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time. CAUTION: Never mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color. Storage and processing advice - Do not process below +5°C - Store at +20°C in a closed (airtight) container for at least 12 months Supplied as standard - Indicated quantity of filler, packed in a tin (see image) - White hardener paste in plastic tube of 15 grams
€11,90 €9,95
You have seen 192 out of 233 products