Best seller
-
Airo hardener for acrylic Primefill Fuller 4:1 - 1 liter
A high solids hardener for the Airo Acryl Primefill 4:1. (excl. matching quantity of Airo Acryl Primefill)
€31,72 €26,57
-
Airo TOP Primefill white 500ml
Airo TOP Primefill is a new formula primer in an aerosol can. Because it's in an aerosol can, you can easily reach all areas for treatment. The primer can be applied as a fine finish and dries very quickly. Once dry, it can be sanded to a smooth, pore-free surface. Exceptional adhesion to plastic, metal, galvanized and galvanized sheet metal, aluminum, wood, and painted surfaces. Available in different colours.
€19,43 €16,55
-
Airo Tack Plastic Superfast 30sec-50ml
Airo Tack Plastic Mediumfast repairs plastic parts in 120 seconds. This powerful 2K adhesive dries in 120 seconds. Its small size makes it easy to use in a caulking gun with a plastic adapter. Supplied without the required Mixer Tip Round for 2K glue.
€12,98 €11,18
-
Airo Polyester thinner 1ltr
Reactive thinner for polyester products. Unlike nitro, acrylic, or synthetic resin thinners, Airo Polyester Thinner reacts with polyester resins and is chemically incorporated into the resin molecule. NB: Polyester thinner is sensitive to moisture. Close the packaging tightly after use. To be used for: - Airo Unispray - Airo Plamuren (Unipol, Soft, Plastic, ed.) - Airo Spritzfüller - Other Airo polyester products. Instructions for use Add a maximum of 5% to 10% thinner to products. This is because the Airo Polyester thinner doesn't evaporate but reacts with the polyester resin. The properties of the polyester products may change if the Airo Polyester thinner is too high. Storage and processing advice - Do not process below +5°C - Store at +20°C in a closed (airtight) container for at least 6 months Supplied as standard - Indicated amount of thinner, packed in a tin (see image)
€20,51 €17,78
-
Airo Multi filler 2.5 kg
This is a beige 2K polyester filler that can be used as an alternative to Unipol. Airo Multi is a slightly finer and more flexible filler than Unipol. This filler can be used as a normal or fine filler. It doesn't shrink, is easy to sand, and has excellent stability. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper. Adhesion on which surface? - Galvanized metal sheet - Hot-dip galvanized bodywork sheet - Steel plate - Aluminum - Wood - Glass fiber reinforced plastic based on polyester Do not apply on - Acid-curing primers - Wash primer - Nitrocellulose primer - Synthetic primer Instructions for use Sand the surface to which the filler will be applied and remove any dust. Make sure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed so that the filler cannot attract moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying grains may develop after this time. The filler can be sanded after approximately 20 minutes. CAUTION: Never mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color. Storage and processing advice - Do not process below +5°C - Store at +20°C in a closed (airtight) container for at least 12 months Supplied as standard - Indicated quantity of filler, packed in a tin (see image) - Red hardener paste in plastic tube of 50 grams
€38,43 €32,75
-
Airo Multi filler 1 kg
This is a beige 2K polyester filler that can be used as an alternative to Unipol. Airo Multi is a slightly finer and more flexible filler than Unipol. This filler can be used as a normal or fine filler. It doesn't shrink, is easy to sand, and has excellent stability. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper. Adhesion on which surface? - Galvanized metal sheet - Hot-dip galvanized bodywork sheet - Steel plate - Aluminum - Wood - Glass fiber reinforced plastic based on polyester Do not apply on - Acid-curing primers - Wash primer - Nitrocellulose primer - Synthetic primer Instructions for use Sand the surface to which the filler will be applied and remove any dust. Make sure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed so that the filler cannot attract moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying grains may develop after this time. The filler can be sanded after approximately 20 minutes. CAUTION: Never mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color. Storage and processing advice - Do not process below +5°C - Store at +20°C in a closed (airtight) container for at least 12 months Supplied as standard - Indicated quantity of filler, packed in a tin (see image) - Red hardener paste in plastic tube of 25 grams
€19,83 €16,76
-
Airo MS Clearcoat Acrylic 2:1 - 5ltr
Acrylic Clearcoat MS is a medium solid clearcoat that can be used in both air-drying and forced-drying modes for automotive, motorcycle, and industrial applications. Acrylic Clearcoat MS features a UV filter and offers high chemical resistance. It is flexible, yet impact and scratch resistant. It has a high gloss and is universally applicable as a topcoat in a conventional or water-based basecoat system. After mixing (depending on the type of hardener), the clearcoat has a pot life of 3 to 6 hours at +20°C. After 7 minutes of flash-off, the paint dries in 30 to 35 minutes at +60°C. Supplied without matching hardener
€131,23 €109,43
-
Airo Lackspray matt black 500ml
Airo Lacquer Spray is a high-quality lacquer for treating both treated and untreated surfaces. Thanks to its fast drying and excellent coverage, you won't have to wait long. The lacquer is also resistant to petrol, chemicals, and weather influences. It is UV-resistant, lightfast, and has excellent surface hardness. Suitable for metal, wood, pottery, glass, and various types of plastic.
€13,95 €9,33
-
Airo Lackspray glossy black 500ml
Airo Lacquer Spray is a high-quality lacquer for treating both treated and untreated surfaces. Thanks to its fast drying and excellent coverage, you won't have to wait long. The lacquer is also resistant to petrol, chemicals, and weather influences. It is UV-resistant, lightfast, and has excellent surface hardness. Suitable for metal, wood, pottery, glass, and various types of plastic.
€13,84 €9,79
-
Airo HS Clearcoat Ultra Plus SET - 1ltr
**This product is a set of clear lacquer with normal hardener** Acrylic Clear Coat HS Ultra Plus contains no more than 420g of solvent per liter of ready-to-spray solution. It is applied as a clear coat over metallic base paints or solid colors. It is resistant to chemical and mechanical stresses. The paint dries with a glossy, hard surface. The paint films are elastic and scratch-resistant. Airo Acrylic Clear Coat HS Ultra Plus is weather- and fade-resistant, even under harsh climatic conditions. After mixing (depending on the type of hardener), the clearcoat has a pot life of 1 to 6 hours at +20°C. After 7 minutes of flash-off, the paint dries in 10 to 45 minutes at +60°C.
€61,36 €45,22
-
Airo Hardener paste white 50gr. - tube
Dibenzoyl peroxide hardener for two-component fillers and polyester resins. It is used as a free-radical additive for the hardening of unsaturated polyester resins pre-accelerated with tribasic aromatic amines. Using the correct ingredients in the hardener ensures that Airo fillers cure well within the specified time. No guarantee can be given when using other brands. To be used for - Airo filler with light color 2.5kg Instructions for use Add approximately 2% to 5% hardener to the filler for proper mixing. The hardener is specifically designed for Airo fillers and is not guaranteed to work with other fillers. Above 50°C, the hardener paste may decompose, as it may degrade upon contact with dirt, ash, rust, or metal swarf. CAUTION: Never mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color. Storage and processing advice - Do not process below +5°C - Recommended processing temperature is between +18°C and +25°C - Store at +20°C in a closed (airtight) container for at least 6 months Supplied as standard - Hardener paste in plastic tube with screw cap Always read the instructions on the packaging carefully before use. Make sure you understand the safety recommendations and hazard warnings.
€4,35 €3,75
-
Airo Hardener paste red 25gr. - tube
Dibenzoyl peroxide hardener for two-component fillers and polyester resins. It is used as a free-radical additive for the hardening of unsaturated polyester resins pre-accelerated with tribasic aromatic amines. Using the correct ingredients in the hardener ensures that Airo fillers cure well within the specified time. No guarantee can be given when using other brands. To be used for - Airo filler with dark color 1kg Instructions for use Add approximately 2% to 5% hardener to the filler for proper mixing. The hardener is specifically designed for Airo fillers and is not guaranteed to work with other fillers. Above 50°C, the hardener paste may decompose, as it may degrade upon contact with dirt, ash, rust, or metal swarf. CAUTION: Never mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color. Storage and processing advice - Do not process below +5°C - Recommended processing temperature is between +18°C and +25°C - Store at +20°C in a closed (airtight) container for at least 6 months Supplied as standard - Hardener paste in plastic tube with screw cap Always read the instructions on the packaging carefully before use. Make sure you understand the safety recommendations and hazard warnings.
€3,45 €2,89
-
Airo Foam Abrasive Sheets 115x125mm
The soft and flexible Airo Foam Abrasive Sheets are designed for sanding profiled surfaces and rounded, hard-to-reach corners by hand. Airo Foam Abrasive Sheets are widely used in the automotive, painting, and garage sectors. The foam layer is easy to grip and applies even pressure, reducing the risk of sanding through the surface. The sheets are packed in a handy dispenser box with 200 tear-off sheets per roll.
€67,97 €54,11
-
Airo Flexi filler 0.5 kg/SB
A fast-curing gray, elastic 2K polyester filler with excellent adhesion to various plastics. Ideal for repairing damaged bumpers and spoilers. Can be overpainted with acrylic filler and 2K lacquers. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper. Adhesion on which surface? - Bumpers and spoilers made of plastic or polyester Do not apply on - Wash primer - Acid-curing primers - Nitrocellulose primer - Synthetic primer Instructions for use Sand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time. CAUTION: Never mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color. Storage and processing advice - Do not process below +5°C - Store at +20°C in a closed (airtight) container for at least 12 months Supplied as standard - Indicated quantity of filler, packed in a tin (see image) - Red hardener paste in plastic tube of 15 grams Always read the instructions on the packaging carefully before use. Make sure you are familiar with the safety recommendations and hazard warnings.
€15,07 €12,67
-
Airo Fix Repair 5kg
Highly reactive polyester resin. Combined with glass mats or glass fabric, it can be used to repair car bodies or damaged areas of GRP parts. Airo FIX and glass mats can also be used to create small GRP parts. After curing, Airo Fix is dry (non-greasy) and easy to sand. Adhesion on which surface? - Steel plate - Glass fiber reinforced plastic based on polyester Do not apply on - Wash primer - Acid-hardening primers - Nitrocellulose primer - Synthetic primer Instructions for use Sand the surface to which the filler will be applied and remove any dust. Make sure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed so that the filler cannot attract moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 10 minutes, as drying grains may develop after this time. After approximately 25 to 30 minutes of curing time, the Airo Fix can be sanded with P80 to P280 grit. CAUTION: Never mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color. Storage and processing advice - Do not process below +5°C - Store at +20°C in a closed (airtight) container for at least 12 months Supplied as standard - Indicated quantity of resin, packed in a tin (see image) - 2x red hardener paste in plastic tube of 50 grams Always read the instructions on the packaging carefully before use. Make sure you are familiar with the safety recommendations and hazard warnings.
€118,52 €101,20
-
Airo Faserpoly filler 1.5 kg
A strong, light-yellow polyester resin with long glass fibers that cures quickly. The filler is highly resistant to water, gasoline, mineral oil, diluted acids, and alkalis. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper. Adhesion on which surface? - Steel plate - Glass fiber reinforced plastic based on polyester Do not apply on - Aluminum - Galvanized sheet metal - Wash primer - Acid-hardening primers - Nitrocellulose primer - Synthetic primer Instructions for use Sand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time. CAUTION: Never mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color. Storage and processing advice - Do not process below +5°C - Store at +20°C in a closed (airtight) container for at least 12 months Supplied as standard - Indicated quantity of filler, packed in a tin (see image) - Red hardener paste in plastic tube of 50 grams
€35,29 €30,48
-
Airo Epoxy Grund Universal primer 1 ltr
A beige 2-component (spray) primer based on epoxy resin with strong adhesion to various substrates, particularly aluminum and galvanized parts. It cures quickly, is water-resistant, and offers excellent rust protection. After mixing, the primer has a pot life of 8 hours. It is dust-dry after just 20 minutes and sandable after 4 to 5 hours at 20°C. The primer is sanded with a 150 to 240 grit sandpaper after 4 to 5 hours of curing time. Adhesion on which surface? - Steel plate - Iron - Aluminum - Galvanized base - Glass fiber reinforced plastic based on polyester Instructions for use Sand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or loose paint residue. If in doubt, degrease the surface with a clean cloth to improve adhesion. Mix the base with the hardener in a 3:1 ratio (add thinner to your liking if necessary). This mixture can be applied with a spray gun with a 1.5 to 1.7 mm nozzle at a pressure of 1.8 to 2 bar. It can be sanded after approximately 4 to 5 hours of curing time or resprayed. Once the product is applied below the temperature of +10°C, the drying time becomes significantly longer. Drying time +20°C - dust dry after 20 minutes, can be sprayed over after 4 hours, complete drying time 12 hours +60°C – drying time 40 minutes (with a layer thickness of approx. 50 µm) Storage and processing advice - Do not process below +10°C - Store at +20°C in a closed (airtight) container for at least 12 months Supplied as standard - Indicated quantity of primer, packed in a tin (see image) - liquid hardener paste in a can of 15 grams
€55,89 €47,48
-
Airo Epoxy Grund Universal primer 1 ltr
A beige 2-component (spray) primer based on epoxy resin with strong adhesion to various substrates, particularly aluminum and galvanized parts. It cures quickly, is water-resistant, and offers excellent rust protection. After mixing, the primer has a pot life of 8 hours. It is dust-dry after just 20 minutes and sandable after 4 to 5 hours at 20°C. The primer is sanded with a 150 to 240 grit sandpaper after 4 to 5 hours of curing time. Adhesion on which surface? - Steel plate - Iron - Aluminum - Galvanized base - Glass fiber reinforced plastic based on polyester Instructions for use Sand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or loose paint residue. If in doubt, degrease the surface with a clean cloth to improve adhesion. Mix the base with the hardener in a 3:1 ratio (add thinner to your liking if necessary). This mixture can be applied with a spray gun with a 1.5 to 1.7 mm nozzle at a pressure of 1.8 to 2 bar. It can be sanded after approximately 4 to 5 hours of curing time or resprayed. Once the product is applied below the temperature of +10°C, the drying time becomes significantly longer. Drying time +20°C - dust dry after 20 minutes, can be sprayed over after 4 hours, complete drying time 12 hours +60°C – drying time 40 minutes (with a layer thickness of approx. 50 µm) Storage and processing advice - Do not process below +10°C - Store at +20°C in a closed (airtight) container for at least 12 months Supplied as standard - Indicated quantity of primer, packed in a tin (see image) - liquid hardener paste in a can of 15 grams
€30,21 €26,05
-
Airo HS Profit Line Clear coat 2:1 - 5ltr
Acrylic Clear Coat HS Ultra Plus contains no more than 420g of solvent per liter of ready-to-spray solution. It is applied as a clear coat over metallic base paints or solid colors. It is resistant to chemical and mechanical stresses. The paint dries with a glossy, hard surface. The paint films are elastic and scratch-resistant. Airo Acrylic Clear Coat HS Ultra Plus is weather- and fade-resistant, even under harsh climatic conditions. After mixing (depending on the type of hardener), the clearcoat has a pot life of 1 to 6 hours at +20°C. After 7 minutes of flash-off, the paint dries in 10 to 45 minutes at +60°C.
€152,94 €133,76
-
Mirka Hand sanding block 70x125 mm velcro
The Airo Grip Sanding Block has an ergonomic handle for a secure grip. A special connection for a Ø21mm dust extraction system is located on the back. The Velcro sanding base has holes for dust extraction.
€44,66 €38,79
-
Mirka Abranet 125 mm discs velcro
Autonet is a revolutionary sanding product that, when combined with a dust extraction system, enables dust-free sanding with a Velcro connection. The specially developed surface is constructed of a fine network of polyamide threads to which the grit is applied. The space between the disc and the backing pad creates channels for the transport of dust from the surface being sanded to the holes in the backing pad. The Autonet disc reduces dust by almost 100%. Autonet is ideally suited for car damage repair, the wood and plastics industry and yacht building.
€47,56 €37,27
-
Mirka Abranet 125 mm discs velcro
Autonet is a revolutionary sanding product that, when combined with a dust extraction system, enables dust-free sanding with a Velcro connection. The specially developed surface is constructed of a fine network of polyamide threads to which the grit is applied. The space between the disc and the backing pad creates channels for the transport of dust from the surface being sanded to the holes in the backing pad. The Autonet disc reduces dust by almost 100%. Autonet is ideally suited for car damage repair, the wood and plastics industry and yacht building.
€47,56 €37,27
-
Mirka Abranet 200 mm discs velcro
Abranet Ace is designed for heavy-duty and demanding sanding applications. Thanks to its optimized net construction and ceramic grit, Abranet Ace offers superior material removal and performance on hardwoods (such as beech and oak) and provides fast results on various other hard surfaces. Abranet Ace is also an ideal product for sanding primers. It delivers fast and effective results and has a very long service life. Technical data Grain: ceramic Bonding: resin over resin Base: polyamide / polyester Sprinkle: closed Color: light red Supplied in boxes of 50 discs
€76,52 €59,40
-
Mirka Abranet 200 mm discs velcro
Abranet Ace is designed for heavy-duty and demanding sanding applications. Thanks to its optimized net construction and ceramic grit, Abranet Ace offers superior material removal and performance on hardwoods (such as beech and oak) and provides fast results on various other hard surfaces. Abranet Ace is also an ideal product for sanding primers. It delivers fast and effective results and has a very long service life. Technical data Grain: ceramic Bonding: resin over resin Base: polyamide / polyester Sprinkle: closed Color: light red Supplied in boxes of 50 discs
€56,01 €48,94
You have seen 72 out of 233 products