{"title":"Car body filler","description":"","products":[{"product_id":"airo-faserplast-plamuur-0-8-kg-sb","title":"Airo Faserplast filler 0.8 kg\/SB","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eFaserplast is an olive-green, fiberglass-based 2K polyester filler for working through rusted bodywork parts. This filler is a perfect blend of filler and short polyester fibers. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized metal sheet\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-hardening primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Red hardener paste in plastic tube of 25 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064232587646,"sku":"G201OSB","price":14.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Faserplast_775g.jpg?v=1772911278"},{"product_id":"airo-faserplast-plamuur-2-kg","title":"Airo Faserplast filler 2 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eFaserplast is an olive-green, fiberglass-based 2K polyester filler for working through rusted bodywork parts. This filler is a perfect blend of filler and short polyester fibers. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized metal sheet\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Red hardener paste in plastic tube of 25 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064232620414,"sku":"G201T00","price":25.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Faserplast-1950g.jpg?v=1772911295"},{"product_id":"airo-faserpoly-plamuur-0-6-kg-sb","title":"Airo Faserpoly filler 0.6 kg\/SB","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eA strong, light-yellow polyester resin with long glass fibers that cures quickly. The filler is highly resistant to water, gasoline, mineral oil, diluted acids, and alkalis. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized sheet metal\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-hardening primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Red hardener paste in plastic tube of 25 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064232685950,"sku":"G101MSB","price":16.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Faserpoly_575g.jpg?v=1772911328"},{"product_id":"airo-faserpoly-plamuur-1-5-kg","title":"Airo Faserpoly filler 1.5 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eA strong, light-yellow polyester resin with long glass fibers that cures quickly. The filler is highly resistant to water, gasoline, mineral oil, diluted acids, and alkalis. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized sheet metal\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-hardening primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Red hardener paste in plastic tube of 50 grams\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064232817022,"sku":"G101S00","price":30.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Faserpoly_1450g.jpg?v=1772911344"},{"product_id":"airo-fix-reparatie-set-0-25kg-sb","title":"Airo Fix Repair - Set 0.25kg\/SB","description":"\u003cp\u003e \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eHighly reactive polyester resin. Combined with glass mats or glass fibers, it can be used to repair car bodies or damaged areas of GRP parts. Airo FIX and glass mats can also be used to create small GRP parts. After curing, Airo Fix is ​​dry and easy to sand.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Make sure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed so that the filler cannot attract moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 10 minutes, as drying grains may develop after this time. After approximately 25 to 30 minutes of curing time, the Airo Fix can be sanded with P80 to P280 grit.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Red hardener paste in plastic tube of 8 grams\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass mat 330g\/m2 á 1\/8 m2\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e \u003cem\u003eAlways read the instructions on the packaging carefully before use. Make sure you are familiar with the safety recommendations and hazard warnings.\u003c\/em\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064233046398,"sku":"M101LSB","price":10.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Fix_250g.jpg?v=1772911407"},{"product_id":"airo-fix-reparatie-set-0-8-kg-sb","title":"Airo Fix Repair - Set 0.8 kg\/SB","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eHighly reactive polyester resin. Combined with glass mats or glass fabric, it can be used to repair car bodies or damaged areas of GRP parts. Airo FIX and glass mats can also be used to create small GRP parts. After curing, Airo Fix is ​​dry (non-greasy) and easy to sand.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003e- Acid-hardening primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Make sure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed so that the filler cannot attract moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 10 minutes, as drying grains may develop after this time. After approximately 25 to 30 minutes of curing time, the Airo Fix can be sanded with P80 to P280 grit.\u003c\/span\u003e \u003cbr\u003e\u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of resin, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Red hardener paste in plastic tube of 25 grams\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass mat 330g\/m2 á 1\/2 m2\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e \u003cem\u003eAlways read the instructions on the packaging carefully before use. Make sure you are familiar with the safety recommendations and hazard warnings.\u003c\/em\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064233079166,"sku":"M101OSB","price":26.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Fix_800g.jpg?v=1772911424"},{"product_id":"airo-flexi-plamuur-0-5-kg-sb","title":"Airo Flexi filler 0.5 kg\/SB","description":"\u003cp\u003e \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA fast-curing gray, elastic 2K polyester filler with excellent adhesion to various plastics. Ideal for repairing damaged bumpers and spoilers. Can be overpainted with acrylic filler and 2K lacquers. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Bumpers and spoilers made of plastic or polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Red hardener paste in plastic tube of 15 grams\u003c\/span\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.airo-chemie.com\/pdf\/E5_SD_Flexi_Kunststoffspachtel_NL.pdf\" target=\"_blank\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e \u003cem\u003eAlways read the instructions on the packaging carefully before use. Make sure you are familiar with the safety recommendations and hazard warnings.\u003c\/em\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"1 piece","offer_id":56386946957694,"sku":"E501LSB-stuk","price":12.67,"currency_code":"EUR","in_stock":true},{"title":"12 pieces","offer_id":56386946990462,"sku":"E501LSB-doos","price":136.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Flexi_485g.jpg?v=1772911457"},{"product_id":"airo-flexi-plamuur-2-kg","title":"Airo Flexi filler 2 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eA fast-curing gray, elastic 2K polyester filler with excellent adhesion to various plastics. Ideal for repairing damaged bumpers and spoilers. Can be overpainted with acrylic filler and 2K lacquers. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Bumpers and spoilers made of plastic or polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-hardening primers\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Red hardener paste in plastic tube of 50 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"1 piece","offer_id":56386948858238,"sku":"E501T00-stuks","price":31.42,"currency_code":"EUR","in_stock":true},{"title":"6 pieces","offer_id":56386948891006,"sku":"E501T00-doos","price":168.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Flexi-2000g.jpg?v=1772911475"},{"product_id":"airo-metallic-plamuur-2-5-kg","title":"Airo Metallic filler 2.5 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eA silver-gray 2K polyester filler with high elasticity. Ideal for filling weld seams or applying filler to components exposed to vibrating sheet metal. Easy to use and easy to sand. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Iron casting\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized sheet metal\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- White hardener paste in plastic tube of 50 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064244351358,"sku":"F501V00","price":32.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Metallic_2450g.jpg?v=1755369771"},{"product_id":"airo-multi-plamuur-1-kg","title":"Airo Multi filler 1 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eThis is a beige 2K polyester filler that can be used as an alternative to Unipol. Airo Multi is a slightly finer and more flexible filler than Unipol. This filler can be used as a normal or fine filler. It doesn't shrink, is easy to sand, and has excellent stability. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized metal sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Hot-dip galvanized bodywork sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Make sure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed so that the filler cannot attract moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying grains may develop after this time. The filler can be sanded after approximately 20 minutes.\u003c\/span\u003e \u003cbr\u003e\u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Red hardener paste in plastic tube of 25 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064244515198,"sku":"CH01P00","price":16.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Multi_2450g.jpg?v=1755369771"},{"product_id":"airo-multi-plamuur-1-5-kg","title":"Airo Multi filler 1.5 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eThis is a beige 2K polyester filler that can be used as an alternative to Unipol. Airo Multi is a slightly finer and more flexible filler than Unipol. This filler can be used as a normal or fine filler. It doesn't shrink, is easy to sand, and has excellent stability. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized metal sheet\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003e- Hot-dip galvanized bodywork sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Make sure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed so that the filler cannot attract moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying grains may develop after this time. The filler can be sanded after approximately 20 minutes.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tube (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Red hardener paste in plastic tube of 40 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064244547966,"sku":"CH01S00","price":25.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Multi-2940g.jpg?v=1755369771"},{"product_id":"airo-multi-plamuur-2-5-kg","title":"Airo Multi filler 2.5 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eThis is a beige 2K polyester filler that can be used as an alternative to Unipol. Airo Multi is a slightly finer and more flexible filler than Unipol. This filler can be used as a normal or fine filler. It doesn't shrink, is easy to sand, and has excellent stability. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized metal sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Hot-dip galvanized bodywork sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Make sure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed so that the filler cannot attract moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying grains may develop after this time. The filler can be sanded after approximately 20 minutes.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Red hardener paste in plastic tube of 50 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064244679038,"sku":"CH01V00","price":32.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Multi_2450g.jpg?v=1755369771"},{"product_id":"airo-multi-plamuur-3-kg","title":"Airo Multi filler 3 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eAiro Multi is a beige 2K polyester filler that can be used as an alternative to Unipol. Airo Multi is a slightly finer and more flexible filler than Unipol. This filler can be used as a normal or fine filler. It doesn't shrink, is easy to sand, and has excellent stability. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized metal sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Hot-dip galvanized bodywork sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Make sure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed so that the filler cannot attract moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying grains may develop after this time. The filler can be sanded after approximately 20 minutes.\u003c\/span\u003e \u003cbr\u003e\u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tube (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Red hardener paste in plastic tube of 60 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064245006718,"sku":"CH01W00","price":48.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Multi-2940g.jpg?v=1755369771"},{"product_id":"airo-multi-green-plamuur-1-1-kg","title":"Airo Multi-Green filler 1.1 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eThis light green 2K polyester filler is made with NEW raw materials and contains fewer solvents. Airo Multi Green is a fine filler that can be used universally as a coarse or finishing filler. It doesn't shrink, is easy to sand, and has excellent stability. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper!\u003c\/span\u003e\u003cbr\u003e \u003cem\u003e*Tin is exactly the same as Unipol 1.5kg\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003e- Galvanized metal sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Hot-dip galvanized bodywork sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Make sure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed so that the filler cannot attract moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying grains may develop after this time. The filler can be sanded after approximately 20 minutes.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tube (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Red hardener paste in plastic tube of 40 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064245039486,"sku":"CF01S00","price":25.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Unipol_1460g.jpg?v=1755369771"},{"product_id":"airo-multi-green-plamuur-1-6-kg","title":"Airo Multi-Green filler 1.6 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eThis light green 2K polyester filler is made with NEW raw materials and contains fewer solvents. Airo Multi Green is a fine filler that can be used universally as a coarse or finishing filler. It doesn't shrink, is easy to sand, and has excellent stability. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized metal sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Hot-dip galvanized bodywork sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Acid-hardening primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Make sure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed so that the filler cannot attract moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying grains may develop after this time. The filler can be sanded after approximately 20 minutes.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Red hardener paste in plastic tube of 50 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"1 piece","offer_id":56386876899710,"sku":"CF01V00-stuks","price":24.23,"currency_code":"EUR","in_stock":true},{"title":"6 pieces","offer_id":56386876932478,"sku":"CF01V00-doos","price":130.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Multi-green_1550g.jpg?v=1755369771"},{"product_id":"airo-multi-green-plamuur-2-3-kg","title":"Airo Multi-Green filler 2.3 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eThis light green 2K polyester filler is made with NEW raw materials and contains fewer solvents. Airo Multi Green is a fine filler that can be used universally as a coarse or finishing filler. It doesn't shrink, is easy to sand, and has excellent stability. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper!\u003c\/span\u003e\u003cbr\u003e \u003cem\u003e*Can is exactly the same as Multi 3kg\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized metal sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Hot-dip galvanized bodywork sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Make sure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed so that the filler cannot attract moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying grains may develop after this time. The filler can be sanded after approximately 20 minutes.\u003c\/span\u003e \u003cbr\u003e\u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tube (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Red hardener paste in plastic tube of 60 grams\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"1 piece","offer_id":56386879684990,"sku":"CF01W00-stuks","price":44.63,"currency_code":"EUR","in_stock":true},{"title":"8 pieces","offer_id":56386879717758,"sku":"CF01W00-doos","price":319.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Multi-2940g.jpg?v=1755369771"},{"product_id":"airo-nitro-kombispachtel-0-1kg","title":"Airo Nitro mixer 0.1kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA gray-green, fast-drying 1K filler based on nitrocellulose resin, packaged in an easy-to-squeeze tube. This filler is ideal for removing minor damage such as scratches or stone chips. Smoothing out minor imperfections is also no problem. The filler is easy to apply with a putty knife or with your finger for difficult areas.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or loose paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from underneath, for example, with a wooden surface. After allowing the filler to dry for 20 minutes, it can be sanded with grit P180 to P400. When applying multiple (thin) coats, allow approximately one hour for drying between each coat.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tube (see image)\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064246710654,"sku":"J101GSB","price":6.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Nitro-Kombispachtel-100g.jpg?v=1755369771"},{"product_id":"airo-nitro-kombispachtel-1kg","title":"Airo Nitro kombispachtel 1kg","description":"\u003cp\u003e \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA grayish-green, fast-drying 1K filler based on nitrocellulose synthetic resin. This filler is ideal for removing minor damage such as scratches or stone chips. Smoothing out minor imperfections is also no problem. The filler is easy to apply with a putty knife or with your finger for difficult areas.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or loose paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from underneath, for example, with a wooden surface. After allowing the filler to dry for 20 minutes, it can be sanded with grit P180 to P400. When applying multiple (thin) coats, allow approximately one hour for drying between each coat.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064246776190,"sku":"J101P00","price":24.11,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Nitro-Kombi-Spachtel_1000g.jpg?v=1755369771"},{"product_id":"airo-plastic-plamuur-0-5-kg-sb","title":"Airo Plastic filler 0.5 kg\/SB","description":"\u003cp\u003e \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eWhite 2K polyester filler with a wide range of applications. Ideal for all filler work in auto body repair, carpentry, and furniture manufacturing. Suitable for small boat repairs above the waterline. Easy to apply, hardens quickly, and sands easily. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized sheet metal\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- White hardener paste in plastic tube of 15 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064247955838,"sku":"A101LSB","price":9.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Plastic_Polyesterspachtel_485g.jpg?v=1755369771"},{"product_id":"airo-plastic-plamuur-1-kg","title":"Airo Plastic filler 1 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eWhite 2K polyester filler with a wide range of applications. Ideal for all filler work in auto body repair, carpentry, and furniture manufacturing. Suitable for small boat repairs above the waterline. Easy to apply, hardens quickly, and sands easily. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized sheet metal\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- White hardener paste in plastic tube of 25 grams\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064247988606,"sku":"A101PSB","price":15.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Plastic_975g.jpg?v=1755369771"},{"product_id":"airo-plastic-plamuur-2-5-kg","title":"Airo Plastic filler 2.5 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eWhite 2K polyester filler with a wide range of applications. Ideal for all filler work in auto body repair, carpentry, and furniture manufacturing. Suitable for small boat repairs above the waterline. Easy to apply, hardens quickly, and sands easily. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized sheet metal\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- White hardener paste in plastic tube of 50 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064248021374,"sku":"A101V00","price":29.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Plastic-2450g.jpg?v=1755369771"},{"product_id":"airo-polyester-verdunner-1ltr","title":"Airo Polyester thinner 1ltr","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eReactive thinner for polyester products. Unlike nitro, acrylic, or synthetic resin thinners, Airo Polyester Thinner reacts with polyester resins and is chemically incorporated into the resin molecule.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNB:\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003ePolyester thinner is sensitive to moisture. Close the packaging tightly after use.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eTo be used for:\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Airo Unispray\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Airo Plamuren (Unipol, Soft, Plastic, ed.)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Airo Spritzfüller\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Other Airo polyester products.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eAdd a maximum of 5% to 10% thinner to products. This is because the Airo Polyester thinner doesn't evaporate but reacts with the polyester resin. The properties of the polyester products may change if the Airo Polyester thinner is too high.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 6 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated amount of thinner, packed in a tin (see image)\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064248054142,"sku":"L501100","price":17.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Polyester-Verduennung_1000ml.jpg?v=1755369771"},{"product_id":"airo-soft-plamuur-1-kg","title":"Airo Soft filler 1 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eA white\/beige 2K polyester filler with a wide range of applications. Ideal for all filler work in body repair shops, carpentry workshops, and furniture manufacturing. It's also suitable for small boat repairs above the waterline. Easy to apply, hardens quickly, and sands easily. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper!\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- When processing on galvanised metal sheet, use Airo Unipol as a base!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized sheet metal\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- White hardener paste in plastic tube of 25 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064248185214,"sku":"C101P00","price":14.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Soft_975g.jpg?v=1755369771"},{"product_id":"airo-soft-plamuur-1-5-kg","title":"Airo Soft filler 1.5 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eA white\/beige 2K polyester filler with a wide range of applications. Ideal for all filler work in body repair shops, carpentry workshops, and furniture manufacturing. It's also suitable for small boat repairs above the waterline. Easy to apply, hardens quickly, and sands easily. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- When processing on galvanised metal sheet, use Airo Unipol as a base!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized sheet metal\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-hardening primers\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tube (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- White hardener paste in plastic tube of 40 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064249135486,"sku":"C101S00","price":24.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Soft_1460g.jpg?v=1755369771"},{"product_id":"airo-soft-plamuur-2-5-kg","title":"Airo Soft filler 2.5 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eA white\/beige 2K polyester filler with a wide range of applications. Ideal for all filler work in body repair shops, carpentry workshops, and furniture manufacturing. It's also suitable for small boat repairs above the waterline. Easy to apply, hardens quickly, and sands easily. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- When processing on galvanised metal sheet, use Airo Unipol as a base!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized sheet metal\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e \u003cbr\u003e\u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- White hardener paste in plastic tube of 50 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064249201022,"sku":"C101V00","price":29.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Soft_2450g.jpg?v=1755369771"},{"product_id":"airo-soft-plamuur-3-kg","title":"Airo Soft filler 3 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eA white\/beige 2K polyester filler with a wide range of applications. Ideal for all filler work in body repair shops, carpentry workshops, and furniture manufacturing. It's also suitable for small boat repairs above the waterline. Easy to apply, hardens quickly, and sands easily. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- When processing on galvanised metal sheet, use Airo Unipol as a base!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized sheet metal\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tube (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- White hardener paste in plastic tube of 60 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064249233790,"sku":"C101W00","price":43.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Soft_2940g.jpg?v=1755369771"},{"product_id":"airo-superflex-plamuur-1-kg","title":"Airo Superflex filler 1 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003epIs a very white 2K filler. This polyester filler is characterized by its maximum fineness and easy sanding. The sanded surface is pore-free. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized sheet metal\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-hardening primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- White hardener paste in plastic tube of 25 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064249364862,"sku":"A201P00","price":15.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Superflex_975g.jpg?v=1755369771"},{"product_id":"airo-superflex-plamuur-1-5-kg","title":"Airo Superflex filler 1.5 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eThis is a very white 2K filler. This polyester filler is characterized by its exceptional fineness and easy sanding. The sanded surface is pore-free. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003e- Galvanized sheet metal\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e \u003cbr\u003e\u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tube (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- White hardener paste in plastic tube of 40 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064249430398,"sku":"A201S00","price":25.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Superflex_1460g.jpg?v=1755369771"},{"product_id":"airo-superflex-plamuur-2-5-kg","title":"Airo Superflex filler 2.5 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eThis is a very white 2K filler. This polyester filler is characterized by its exceptional fineness and easy sanding. The sanded surface is pore-free. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003e- Galvanized sheet metal\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e \u003cbr\u003e\u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- White hardener paste in plastic tube of 50 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064249463166,"sku":"A201V00","price":30.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Superflex_2450g.jpg?v=1755369772"},{"product_id":"airo-superflex-plamuur-3-kg","title":"Airo Superflex filler 3 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eThis is a very white 2K filler. This polyester filler is characterized by its exceptional fineness and easy sanding. The sanded surface is pore-free. After 20 minutes of curing time, the filler can be sanded with a P80 to P280 grit sandpaper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003e- Galvanized sheet metal\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e \u003cbr\u003e\u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tube (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- White hardener paste in plastic tube of 60 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"1 piece","offer_id":56386886467966,"sku":"A201W00-stuks","price":46.8,"currency_code":"EUR","in_stock":true},{"title":"8 pieces","offer_id":56386886500734,"sku":"A201W00-doos","price":335.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Superflex_2940g.jpg?v=1755369771"},{"product_id":"airo-supermetall-plamuur-1-4-kg","title":"Airo Supermetall filler 1.4 kg","description":"\u003cp\u003e \u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eSilver-gray aluminum-based 2K polyester filler for repairing defective aluminum or iron castings. Casting molds can be filled and cracks can be filled. It can be used in bodywork repairs as a tin replacement and for filling over welds. Airo SUPERMETALL's high heat resistance is also noteworthy, namely up to 30 minutes at +220°C without loss of adhesion. After a 20-minute curing time, the filler can be sanded with a P80 to P280 grit sandpaper!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Iron casting\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized sheet metal\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed so that the filler cannot attract moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 1% hardener for the best result. Try not to work the filler for longer than 10 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 6 months\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- White hardener paste in plastic tube of 25 grams\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"1 piece","offer_id":56386951545214,"sku":"F701R16-stuks","price":39.21,"currency_code":"EUR","in_stock":true},{"title":"6 pieces","offer_id":56386951577982,"sku":"F701R16-doos","price":210.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Supermetall_1375g.jpg?v=1755369772"},{"product_id":"airo-unipol-plamuur-2-5-kg","title":"Airo Unipol filler 2.5 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eAiro Unipol is a beige 2K universal polyester filler with a wide range of applications. It can be used as a coarse or fine filler, has a short curing time, and is easy to sand. After 20 minutes of curing, the filler can be sanded with grit sizes P80 to P280.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized metal sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Hot-dip galvanized bodywork sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Acid-hardening primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Red hardener paste in plastic tube of 50 grams\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"1 piece","offer_id":56328394932606,"sku":"C501V00-stuks","price":32.26,"currency_code":"EUR","in_stock":true},{"title":"6 pieces","offer_id":56328394965374,"sku":"C501V00-doos","price":173.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Unipol_2450g.jpg?v=1755369772"},{"product_id":"airo-unipol-plamuur-3-kg","title":"Airo Unipol filler 3 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eAiro Unipol is a beige 2K universal polyester filler with a wide range of applications. It can be used as a coarse or fine filler, has a short curing time, and is easy to sand. After 20 minutes of curing, the filler can be sanded with grit sizes P80 to P280.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized metal sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Hot-dip galvanized bodywork sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tube (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Red hardener paste in plastic tube of 60 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064251658622,"sku":"C501W00","price":48.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Unipol-2940g.jpg?v=1755369771"},{"product_id":"airo-unispray-spuitplamuur-1-5-kg","title":"Airo Unispray spray filler 1.5 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eA gray, universal 2K polyester spray filler with excellent filling properties. It is used in automotive body repair, mechanical engineering, and the furniture industry. After mixing, the filler has a pot life of approximately 25 to 30 minutes. After 30 minutes of drying time at 60°C, the filler can be sanded with a 150 to 240 grit sandpaper.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eThis product is intended for professional use only\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Thermally galvanized bodywork sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized metal sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Acid-hardening primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to be filled and remove any dust. Ensure there is no rust, grease, dirt, or loose paint residue. Before each application, clean and degrease the entire surface to be painted with silicone remover. Do not apply to thermoplastic or acidic products (reaction primers). Before spraying Unispray, dry-sand with P180-320 and then degrease with silicone remover, then apply filler. Using too little or too much hardener can cause stains in the top coat. If necessary, use a maximum of 10% thinner.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cu\u003eSteel substrates:\u003c\/u\u003e\u003cbr\u003e \u003cspan\u003ePre-clean with silicone remover, then sand with P120 and then degrease with silicone remover.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cu\u003eAluminum substrates:\u003c\/u\u003e\u003cbr\u003e \u003cspan\u003ePre-clean with silicone remover, then sand with P220 and then degrease with silicone remover.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cu\u003eGalvanized surfaces:\u003c\/u\u003e \u003cbr\u003e\u003cspan\u003ePre-clean with silicone remover, then sand with P220 and then degrease with silicone remover.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tin (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Liquid hardener in a plastic jar\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Default Title","offer_id":56064251691390,"sku":"HD01S00","price":27.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Unispray-1475g.jpg?v=1755369771"},{"product_id":"airo-unipol-plamuur-10-kg","title":"Airo Unipol filler 3 kg","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003eAiro Unipol is a beige 2K universal polyester filler with a wide range of applications. It can be used as a coarse or fine filler, has a short curing time, and is easy to sand. After 20 minutes of curing, the filler can be sanded with grit sizes P80 to P280.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eAdhesion on which surface?\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Galvanized metal sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Hot-dip galvanized bodywork sheet\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Steel plate\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Aluminum\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wood\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Glass fiber reinforced plastic based on polyester\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eDo not apply on\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Acid-curing primers\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Wash primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Nitrocellulose primer\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Synthetic primer\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eInstructions for use\u003c\/strong\u003e \u003cbr\u003e\u003cspan\u003eSand the surface to which the filler will be applied and remove any dust. Ensure there is no rust, grease, dirt, or (loose) paint residue. If in doubt, degrease the surface with a clean cloth for better adhesion. Always check that the surface is properly sealed to prevent the filler from attracting moisture from below, for example, with a wooden surface. Apply the desired amount of filler to the putty knife and mix it with approximately 2% hardener for the best result. Try not to work the filler for longer than 4 to 6 minutes, as drying granules may develop in the filler after this time.\u003c\/span\u003e\u003cbr\u003e \u003cu\u003eCAUTION:\u003c\/u\u003e \u003cspan\u003eNever mix too much hardener! Excessive hardener won't speed up the process, but it can actually cause the paint layer to delaminate or change color.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eStorage and processing advice\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Do not process below +5°C\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Store at +20°C in a closed (airtight) container for at least 12 months\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eSupplied as standard\u003c\/strong\u003e\u003cbr\u003e \u003cspan\u003e- Indicated quantity of filler, packed in a tube (see image)\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e- Red hardener paste in plastic tube of 60 grams\u003c\/span\u003e\u003c\/p\u003e","brand":"Plamuren.com","offers":[{"title":"Central connection in the middle","offer_id":56386775449982,"sku":"C501YOS","price":149.14,"currency_code":"EUR","in_stock":true},{"title":"42-26 Glasurit\/BAS-F connection","offer_id":56386775482750,"sku":"C501YGS","price":142.04,"currency_code":"EUR","in_stock":true},{"title":"42-32.5 Sikkens\/Akzo connection","offer_id":56386775515518,"sku":"C501YSS","price":142.04,"currency_code":"EUR","in_stock":true},{"title":"42-39 Voss\/CAR system connection","offer_id":56386775548286,"sku":"C501YVS","price":142.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0952\/2125\/2478\/files\/Unipol10kg.jpg?v=1760185563"}],"url":"https:\/\/plamuren.com\/en\/collections\/carroserie-plamuur.oembed?page=2","provider":"Plamuren.com","version":"1.0","type":"link"}